Views:
🔧 E6 Mirado Refrigerator – Quick Install Steps
1. Site Prep
• Verify 6" clearance & level floor
• Dedicated 220V outlet (breaker OFF)
2. Uncrate & Position
• Inspect for damage
• Move into place, level unit
3. Electrical
• Lockout/tagout breaker
• Connect wiring harness, secure ground
4. Refrigerant
• Connect pre-charged lines
• Leak check with soap/electronic detector
5. Startup
• Restore power, unit powers on
• Set thermostat: 38°F / 3.3°C
6. Checks
• Verify cooling after 20–30 mins
• Inspect door seals, record temps
7. Complete
• Record serial #
• Capture photos & upload
• Customer walkthrough + signature
Keywords: Installation, Mirado, E6, Refrigerator